Infeed unit with primary unwinder with axial control with easily interchangeable 3” and 6” reel holder spindles.
Unwinding reel diameter measuring system by means of an ultrasonic sensor.
Bench for joining the material heads without overlapping, complete with pneumatically operated locking tweezers and rubber-coated pressure roller.
Vertically mobile output roll with adjustable travel, used to detach the material from the inspection table during the feed phase.
Pull unit for controlled advancement of the material comprising a motorised rubber/polyurethane coated roller and a tamper.
Output unit with primary winding featuring axial control and easily interchangeable 3” and 6” reel holder spindles.
Material alignment system by means of on-board sensor and actuator, used for the transverse movement of the winding guide.
Electrical equipment for system operation and control.
Technical specifications:
- MATERIAL WIDTH: 50 ÷ 536 mm
- REEL DIAMETER: maximum 600 mm
- REEL HOLDER CORE INTERNAL DIAMETER: 3” - 6”
- MAXIMUM REEL WEIGHT: 175 kg
- CORE THICKNESS: minimum 12 mm
- MATERIAL THICKNESS: 0.05 ÷ 0.5 mm
- OPERATING SPEED: maximum 100 mm/1”
- FORWARD MOVEMENT: approximately 500 mm pitch
- MATERIAL PULL: 20 ÷ 150 nm
